CEESC Extra Large Cat Door (Outer Size 11″ x 9.8″), 4 Way Locking Large Cat Door for Interior Exterior Doors, Weatherproof Pet Door for Cats & Doggie with Circumference < 24.8" (Black)

Product Description

Additional Giant Cat Door Specs

Be aware:

Outer Measurement: 9.8″ x 11″ x 2.15″(W x H x D);Internal dimension: 7.9″ x 8.7″(W x H);Minimize-Out Measurement: 8.3″ x 9.5″ (W x H);Match Cats as much as 25.54 lbs （The waistline lower than 24.8″ );Materials: ABS plasticColor: BlackStyle: FlapWeight: 1.19 lb

Ensure that the width and top(shoulder degree) of the pet are inferior to the pet display screen door, thanks.The depth of door/wall/window you will set up to had higher greater than the depth 2.17″, in order to screw in 8 screws from each side simply.

Bundle Consists of of CEESC Additional Giant Cat Door :

1 X Giant Cat flap door

8 X Screws

8 X Screw caps

1 X Set up directions

If the cat door is just too thick for the door, please use scissors or reducing machine to chop alongside the road within the width of the body.

Installion directions

1. Draw define on the paper board

Draw the cat door body on a paper board and reduce it down.

Be aware:

You had higher put together these essential instruments first, pencil, ruller, electrical noticed, drill, screwdriver, double-side tape.

2. Draw define on the door

Use a pencil draw across the fringe of the reduce paper on the door you wish to be mounted to.

Be aware:

Usually, common set up top is round 10-15 cm from the ground.

3. Drill 4 corners for holes

Drill 4 corners for thorough holes first with an electrical drill.

4. Minimize out a tunnel gap

Minimize out the tunnel gap with an electrical noticed beginning at holes drilled.

5. Put the cat door within the door

After the tunnel gap is reduce out, it is higher to wrap round it with a layer of wooden pores and skin. And in case your gap is reducing just a little huge, it is fairly neccessary.

6. Minimize down tunnel depth if essential

If the cat door is just too thick on your door, use a scissors or reducing machine to chop down some a part of tunnel alongside the road A or B. The reducing scale is about 2-4CM.

7. Mount to the door

Mount the cat door with double-side tape to the door. 8 screws have been offered on your use, tighten them with a screwdriver on each side.

Be aware:

8 screws for 4 holes on each side, screw all of them in 2 sides as illustration proven above, please. These 8 screws are designed to work collectively, they aren’t quick.

8. Finished

Place screw caps over the screw holes, press them on. The set up is totally executed.

☞4 WAY SWITCH MODE — The pet door may very well be adjusted by the Pink and Inexperienced switches with tabs to 4 modes: out solely, in solely, each out and in, and totally locked, straightforward management of your pet’s out and in.
☞SIZE & APPLICATION — Outer Measurement: 9.8″ x 11″ x 2.15″(W x H x D), Internal dimension: 7.9″ x 8.7″(W x H), Minimize-Out Measurement: 8.3″ x 9.5″ (W x H), appropriate for set up on doorways and skinny partitions, appropriate for cat and doggie lighter than 27.54 lb and waist circumference shorter than 24.8″
☞SAFE & THOUGHTFUL — The clear flap let pet see via the door. Exterior rain seal is for waterproof. Brush strip eliminates noise from the door closing.
☞EASY TO INSTALL — Full directions included, make you simply set up in home windows, doorways, cabinets, panels and partitions and so on.
☞EXCELLENT QUALITY — Product of ABS materials, weather-resistant, the floor is clean and sturdy.