CEESC Extra Large Cat Door (Outer Size 11″x9.8″), Weatherproof, White, ABS Material, 4-Way Locking Flap for Cats & Dogs up to 25.54 lbs

Product Description

Further Massive Cat Door Specs

Word:

Outer Dimension: 9.8″ x 11″ x 2.15″(W x H x D);Interior dimension: 7.9″ x 8.7″(W x H);Lower-Out Dimension: 8.3″ x 9.5″ (W x H);Match Cats as much as 25.54 lbs （The waistline lower than 24.8″ );Materials: ABS plasticColor: WhiteStyle: FlapWeight: 1.19 lb

Guarantee that the width and top(shoulder stage) of the pet are inferior to the pet display screen door, thanks.The depth of door/wall/window you’re going to set up to had higher greater than the depth 2.17″, in order to screw in 8 screws from either side simply.

Package deal Consists of of CEESC Further Massive Cat Door :

1 X Massive Cat flap door

8 X Screws

8 X Screw caps

1 X Set up directions

If the cat door is just too thick for the door, please use scissors or chopping machine to chop alongside the road within the width of the body.

Installion directions

1. Draw define on the paper board

Draw the cat door body on a paper board and minimize it down.

Word:

You had higher put together these crucial instruments first, pencil, ruller, electrical noticed, drill, screwdriver, double-side tape.

2. Draw define on the door

Use a pencil draw across the fringe of the minimize paper on the door you wish to be mounted to.

Word:

Usually, common set up top is round 10-15 cm from the ground.

3. Drill 4 corners for holes

Drill 4 corners for thorough holes first with an electrical drill.

4. Lower out a tunnel gap

Lower out the tunnel gap with an electrical noticed beginning at holes drilled.

5. Put the cat door within the door

After the tunnel gap is minimize out, it is higher to wrap round it with a layer of wooden pores and skin. And in case your gap is chopping just a little massive, it is fairly neccessary.

6. Lower down tunnel depth if crucial

If the cat door is just too thick to your door, use a scissors or chopping machine to chop down some a part of tunnel alongside the road A or B. The chopping scale is about 2-4CM.

7. Mount to the door

Mount the cat door with double-side tape to the door. 8 screws have been supplied to your use, tighten them with a screwdriver on either side.

Word:

8 screws for 4 holes on either side, screw all of them in 2 sides as illustration proven above, please. These 8 screws are designed to work collectively, they don’t seem to be quick.

8. Finished

Place screw caps over the screw holes, press them on. The set up is totally carried out.

4 WAY SWITCH MODE — The pet door might be adjusted by the Crimson and Inexperienced switches with tabs to 4 modes: out solely, in solely, each out and in, and absolutely locked, straightforward management of your pet’s out and in
SIZE & APPLICATION — Outer Dimension: 9.8″ x 11″ x 2.15″(W x H x D), Interior dimension: 7.9″ x 8.7″(W x H), Lower-Out Dimension: 8.3″ x 9.5″ (W x H); matches doorways and skinny partitions, for cats and doggie beneath 27.54 lbs and with a waist smaller than 24.8 inches
SAFE & THOUGHTFUL — The clear flap let pet see via the door. Exterior rain seal is for waterproof. Brush strip eliminates noise from the door closing
EASY TO INSTALL — Full directions included, make you simply set up in home windows, doorways, cabinets, panels and partitions and many others
EXCELLENT QUALITY — Fabricated from ABS materials, weather-resistant, the floor is easy and sturdy